Whiteline Impreza Sway Bar Sway bar – 24mm X heavy duty blade adjustable BSR36XZ

REAR ANTI-ROLL BAR 24MM X HEAVY DUTY BLADE ADJUSTABLE SUBARU IMPREZA WRX & STI GD GG 2003-2007

Performance

Dramatically improve the handling and performance of your vehicle with Adjustable Anti-Roll Bars by Whiteline. Engineered to “Activate More Grip”, Anti-Roll Bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Size

Larger diameter Anti-Roll Bars offer a higher torsional resistance which in turn increases overall roll stiffness. The stiffer the bar, the more force required to move the left and right hand wheels relative to each other, essentially increasing the amount of force required to make the body roll. Bar size (stiffness) also allows for corrections to understeer or oversteer tendencies depending on vehicle type or how the vehicle is being used.

Adjustable

Take control with multi-point adjustable Anti-Roll Bars which allow the driver to fine tune vehicle characteristics to suit their driving preference or conditions. Whether it’s street or sport, dial in more balance and predictability with Whiteline multi-point adjustable Anti-Roll Bars.

Finish

Whiteline Silver powder coating is an electrostatically applied coating that is cured under heat creating a hard skin that is much tougher than conventional paint. Whiteline source the highest quality finishes available to ensure our products are built to withstand the toughest conditions and resist corrosion for years to come.

Forged Ends

A process of stamping and forming each end of the Anti-Roll Bar into a blade design. This feature ensures maximum strength and longevity and allows for multiple adjustment points to be added to each Anti-Roll Bar.

Fitting Kit

Whiteline Anti-Roll Bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.

Lateral Locks

Lateral locks are a DIY product that can be utilized on both factory or Whiteline Anti-Roll Bars. Lateral locks are easily to install and mount directly next to the Anti-Roll Bar mounting points to prevent shifting or sideways movement of the Anti-Roll Bar under lateral (cornering) loads. This results in improved Anti-Roll Bar effectiveness whilst preventing fouling of the Anti-Roll Bar on near by chassis and steering components.

FITMENT

REAR ANTI-ROLL BAR 24MM X HEAVY DUTY BLADE ADJUSTABLE SUBARU IMPREZA WRX & STI GD GG 2003-2007 WORKS WITH THE FOLLOWING VEHICLES.

• SUBARU IMPREZA GD SEDAN GG WAGON MY03-07 EXCL WRX AND STI 9/2002-8/2007
• SUBARU IMPREZA WRX GD SEDAN MY03-07 9/2002-8/2007
• SUBARU IMPREZA WRX GG WAGON MY03-07 10/2002-8/2007
• SUBARU IMPREZA WRX STI GD SEDAN GG WAGON MY03 10/2002-9/2003
• SAAB 9-2X 7/2004-2006

INSTALLATION 

REAR ANTI-ROLL BAR 24MM X HEAVY DUTY BLADE ADJUSTABLE SUBARU IMPREZA WRX & STI GD GG 2003-2007

Installation Guide: Download Now

Installation Time (hours): 2

Difficulty: DIY – Do it yourself

Wheel Alignment Required? Yes

Lubrication Guide for REAR ANTI-ROLL BAR 24MM X HEAVY DUTY BLADE ADJUSTABLE SUBARU IMPREZA WRX & STI GD GG 2003-2007

In the majority of applications the Whiteline bushings act as a flexible bearing and must be greased at the time of assembly.To gain optimum performance from Whiteline products take the following precautions when installing:

Ensure all suspension parts are free from rust, scale, paint and previous rubber deposits.

Please use these hints along with any instructions provided when fitting Whiteline products. Vehicle manufacturers manual should be used to ensure Whiteline warranty compliance.

Shackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage – any damaged components must be replaced or repaired to vehicle manufacturers tolerances.

Grease has been supplied in the kits where required and must be used to optimise bush performance and durability. Grease has been formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point be applied to the bores and outer flanges of all bushes and components – do not grease the outside surfaces of bushes and components.

NOTE:

The major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.

Service Kit Part Number

W0406-24G